Petro Sevilla
Petro Sevilla is a highly stable oil-in-water emulsion developed for use as general purpose, cost effective, metalworking fluid.
- General Machining
- Grinding
- Nitrite free
Operators' health & safety. Reduced risk of the formation of nitrosamines
- Phenol & chlorine free
Environmentally safe. Low disposal costs
- Excellent lubricity
High oil content provides excellent machine tool lubrication
- Emulsion stability
Tolerant to difficult diluent waters
- Corrosion inhibition
High level of corrosion inhibition on tool, slideways and components
Materials:
- Low to medium tensile steels
- Alumunium, copper and their alloys
Mixing :
Petro
Sevilla should be added gradually into the full volume of water – never
the reverse, and gentle agitation maintained until all the oil has been
added and a uniform emulsion obtained. Use lower concentration for
top-up to achieve recommended mix-ratios.
Storage :
The
product should be stored under cover. Avoid extremes of temperature and
protect from frost. Packages should be kept sealed when not in use.
Where
storage of packages in the open cannot be avoided they should be kept
on their side, preferably on a stillage frame or other support to keep
them off the ground, to avoid the collection of water around the outlet
holes which might subsequently contaminate the contents when the
packages are opened.
System Cleaner :
It is
recommended that a Petro System Cleaner is used to purge the machine
tool coolant system prior to filling with a fresh emulsion.
Health & Safety
Petro
Sevilla is unlike to present any significant health or safety hazard
when properly used in the recommended application, and good standards of
industrial and personal hygiene are maintained.
After skin contact, wash immediately with soap and water.
For further guidance on Product Health & Safety refer to the appropriate Petro Product Health & Safety Data Sheet.
Protect the environment :
Do not discharge into drains, soil or water.
Recommended Concentrations :
Concentrations may need to
be increased when machining difficult materials and where the water
hardness of the diluent has an effect on corrosion inhibition.
Typical Physical Characteristics
Posting Komentar